The Dragonhawk Mast Pro PMU Cartridges are designed especially for permanent makeup (PMU) applications. These cartridges have been tested by experienced PMU specialists, ensuring their suitability for various applications. Featuring an ergonomic design for comfort, a stabilizing bar for precision, and a safety membrane to prevent ink from flowing back into the machine.
The needles are made from 304L stainless steel which is polished using an automatic machine. This results in a smoother surface that not only enhances performance but also provides a more comfortable experience for the client.
These PMU cartridge needles are universally compatible with most permanent makeup (PMU) machines. Each box contains 20 cartridge needles that are individually packed in an EO sterilized blister pack.
Key Features:
Universally compatible with most permanent makeup (PMU) machines Designed specifically for precision in permanent makeup treatments Extra sharp, high-quality needles made from 304L stainless steel The casing features an ergonomic design for comfort and better precision Safety membrane to prevent pigments from flowing back into the machine The stabilizer bar prevents the needles from moving and ensures precision Sterilized using EO Gas, ensuring safety and hygiene Each cartridge needle is individually packed in a blister pack, maintaining its sterility until use

Kwadron needles are among the best in the market, known for their razor-sharp, flexible, and strong long taper needles. Unlike other needles on the market that are made from soft steel and easily bend or deform, Kwadron needles are precision-grouped and made from the finest quality steel, ensuring that each needle you use is as good as the last one.
Highly respected tattoo artists around the world rely on the quality and reliability of Kwadron needles. Upgrade your tattooing experience by trying out the needles used by industry professionals.
Kwadron needles are best used in combination with disposable grips from Crystal. <a href="/en/grips-tips/crystal-disposable-grips" target="_blank">Click here</a> to buy Crystal Grips, which come in two sizes with a diameter of either 25 mm or 30 mm. Need to know which needle size fits into which grip size? <a href="/en/kwadron-needle-guide" target="_blank">Click here</a> to see our guide. Please note that this is a general guide and sometimes a combination will not fit perfectly.

Legends for Legends
With 20 years of experience in the tattoo industry, Tattooland, in collaboration with several PMU specialists, has developed a PMU cartridge line unparalleled in terms of, price, quality, stability and durability. These PMU cartridges are available in 14 different sizes, 4 different configurations and both long and medium taper. With this, Legends offers the right needle for every treatment and PMU specialist.
Legends PMU cartridges have an integrated finger grip around the tip to reduce vibrations and increase hand comfort. The grip with the signature Dutch orange colour combined with Legends' extra sharp PMU needles make these PMU cartridges suitable for longer sessions.
These PMU cartridges combine all the good features of the well-known cartridge brands. Legends PMU cartridges have a transparent tip that makes the ink flow and needle perfectly visible while working. A safety membrane inside the tip protects the PMU machine from liquids and cross-contamination, while a stabilizer ensures needle stability and precision.
Each needle configuration has a different coloured cap, which makes it easy to identify which configuration is being used. Additionally, the size of the needle is indicated on the tip of the cartridge.
Legends permanent makeup cartridges are sold in boxes of 20 and are suitable for all PMU machines that fit Kwadron or Cheyenne-type PMU cartridges.
Free sample? Send us an <a href="mailto:info@tattooland.com?subject=Legends PMU Cartridges - Sample Request">email</a> with your order number and we will include a sample box with your order.
Key Features:
Superior quality PMU cartridges PMU needles made from high-quality steel Extra sharp needles Integrated grip around the tip for comfort Transparent tip Safety membrane Coloured caps for easy identification of needle configuration Individually packed in a sterile blister Sterilized by E.O. Gas Box of 20

Legends for Legends
With 20 years of experience in the tattoo industry, Tattooland, in collaboration with several artists, has developed a tattoo cartridge line unparalleled in terms of, price, quality, stability and durability. These tattoo cartridges are available in 96 different sizes, 5 different configurations and both long and medium taper. With this, Legends offers the right needle for every creative challenge and artist.
Legends tattoo cartridges have an integrated finger grip around the tip to reduce vibrations and increase hand comfort. The grip with the signature Dutch orange colour combined with Legends' extra sharp tattoo needles make these tattoo cartridges suitable for longer sessions.
These tattoo cartridges combine all the good features of the well-known cartridge brands. Legends tattoo cartridges have a transparent tip that makes the ink flow and needle perfectly visible while working. A safety membrane inside the tip protects the tattoo machine from liquids and cross-contamination, while a stabilizer ensures needle stability and precision.
Each needle configuration has a different coloured cap, which makes it easy to identify which configuration is being used. Additionally, the size of the needle is indicated on the tip of the cartridge.
Legends tattoo cartridges are sold in boxes of 20 and are suitable for all tattoo machines that fit Kwadron or Cheyenne-type tattoo cartridges.
Free sample? Send us an <a href="mailto:info@tattooland.com?subject=Legends Needle Cartridges - Sample Request">email</a> with your order number, and we will include a sample box with your order.
Key Features:
Superior quality tattoo cartridges Tattoo needles made from high-quality steel Extra sharp needles Integrated grip around the tip for comfort Transparent tip Safety membrane Coloured caps for easy identification of needle configuration Individually packed in a sterile blister Sterilized by E.O. Gas Box of 20

These Vertix Pico Cartridges by Microbeau feature a slim, tapered design for maximum visibility and precision.
Microbea designed the tip of this cartridge to offer superior stability and reduce vibrations. This new tip also features a tip reservoir that helps optimize pigment consumption and prevent splatter. The needles are made from the highest quality, medical-grade stainless steel and a soft membrane has been added to prevent any ink flowing into the machine.
Vertix Pico are suitable for all types of PMU work and help you achieve beautiful results while being gentle on the skin.
Key Features:
Slim, tapered design for maximum visibility Superior stability New tip reservoir that helps optimize pigment consumption and prevent splatter. Soft membrane that prevents ink flowing into the machine and provides an airtight seal High quality, medical-grade stainless-steel needles

Elite Infini cartridges are manufactured to the highest quality standard. Each cartridge is individually packed in a EO gas sterilized blister. The casing is made from medical grade plastic and features a shorter, super thin tip for precision work.
Infini cartridges use a low resistance needle rubber, this allows for the needle to travel faster while running on a lower voltage.
Key Features:
Lower needle resistance, needles travel faster with lower voltage Shorter tip for precision work EO Gas Sterilized Each cartridge is packed individually in a blister

The Comfort Cartridges by Magic Moon use high-quality needles and have multiple features that help you while tattooing.
These cartridges are more comfortable to hold than regular cartridges, this is because it has an integrated tip grip that reduces vibrations. One side of the grip tip has a pattern that works as an anti-slip feature, preventing the cartridges from rolling away when you lay it down.
Comfort cartridges feature a super soft integrated membrane that protects your tattoo machine against liquids and cross-contamination. Colour coded casings allow you to quickly find the configuration of needles you wish to use.
Key Features:
Quality needles Integrated tip grip for comfort Safety membrane Individually packed in sterile blisters Sterilized by E.O. Gas

These PMU Optima cartridges have been specifically designed for permanent make-up and micro pigmentation specialists. The cartridge modules are made by Kwadron, a brand known for manufacturing some of the best tattoo needles and cartridge modules
PMU Optima cartridges feature a needle stabilising system allowing them to be used even for the most delicate treatments. The casing is made of medical grade plastic which ensures minimal friction to keep the needles sharp during long sessions.
Key Features:
Needle stabilising system Medical grade plastic EO Gas sterilised

Bishop Da Vinci V2 Cartridges are high precision needles modules, designed completely by tattoo artists. It has taken two years of development and testing by some of the best artist in the industry to create the V2 version of the Da Vinci Cartridges.
Da Vinci V2 cartridges use 304 stainless steel instead of 316. This steel is slightly stronger and allows for the needle to stay sharper longer. Each needle goes through a strict 8 step quality control by Bishop to ensure that every needle is perfect. Every mold has been customized to fit the needle size perfectly, by doing this magnum needles no longer have any wiggle room.
Key Features:
Medium tension Safety Membrane Vent hole in the casing for a better ink flow Fits all types of cartridge machines and grips Made from 304 Surgical Stainless Steel and medical-grade plastic 100% EO Gas Sterilized Officially licensed by Cheyenne

Kwadron cartridges are used by many and have all the features any good cartridge brand should have. A needle stabilising system for better performance and razor-sharp needles which ensure the best possible healing. The casing is made from medical grade plastic which ensures minimal friction to keep the needles sharp during long sessions. Other configurations and/or sizes are available upon request. <a href="mailto:info@tattooland.com?subject=Kwadron Cartridges - Configuration or Size Request">Click Here</a> to request a configuration or size.
Key Features:
Needle Stabiliser Razor-sharp needles Medical grade plastic Long Taper EO Gas sterilised

These are undoubtedly the best needles in the world made with unprecedented quality, always flawless!
<ul>
<li>Extreme hard steel, so very durable.</li>
<li>Skin heals quicker, due to exceptional sharpness.</li>
<li>100% same needle quality as Cheyenne needles.</li>
<li>Using these (in combination with Crystal Grip) saves you at least 55% on materials, do the math.</li>
<li>No. 1 needle in the world, now available in over 50 configurations.</li>
</ul>
Grip Sizes
Round Liners
Bugpin = 2 grip sizes smaller. (For Example, 7 Round Liner 0.25 (0807) Goes in a 3 RL Grip. With the exeption of sizes 3 Round Liner 0.25 (0803) and 5 Round Liner 0.25 (0805) these also go in grip size 3 RL.) 0.30 = 1 grip size smaller. (For Example, 7 Round Liner 0.30 (1007) Goes in a 5 RL Grip.) 0.35 = Goes in the same grip size as the needle. (For Example, 7 Round Liner 0.35 (1207) Goes in a 7 RL Grip.)

Cartridges & Needles

The Max version of the Lumina lamp has a larger lamp, more Lumens (950 vs 690) and the colour temperature can be set slightly higher (6800k vs 6500k)
The Lumina Max Floor Lamp is an adjustable LED lamp that can be placed on any flat surface and is used to light up large areas. This lamp has a modern design that is equipped with a light diffuser and cool touch heat dissipation for safety.
It features a five-step dimmer that offers numerous light intensity settings and five different Kelvin colour temperatures. Adjust the settings through controls on the lamp itself or through the remote that is included with the lamp.
Technical Specifications:
Head of the lamp length: 21.5 cm Arm Length (Gooseneck): 163 cm Diameter of the foot: 22 cm Weight: 3.1 kg
Light Specifications:
LED Lumens: 950 LUX at 30 cm: 2900 Colour temperature (Kelvin): 2700K to 6800K
Dimensions of the packaging:
Length: 44.5 cm Width: 26 cm Depth: 5 cm Weight: 3.3 kg
The remote requires two AAA (LR03) batteries. The batteries are not included with the lamp.

Please note: The delivery time for this product is 2 to 3 business days
This chair is the successor of the Professional Client chair, one of the most popular chairs in the tattoo industry. What has changed? The foundation of the chair remains the same, but every part has received an upgrade. The chair now features wheels to move it around, thicker cushions and a maintenance free system for adjusting the leg rests. We believe that a great product does not need to be changed. However, small things can always be improved.
One of the most requested features has been added to this chair, wheels and a handle to move it around. Sturdy wheels have been added to the frame and added a handle at the back for easy lifting and moving of the chair.
The chair has a hydraulic system that consists of cylinders. The pumping motion in the system will cause the pistons in the cylinders to push out the liquid and move another part. With a pumping motion, you can adjust the height of the chair. Holding down the foot pedal lowers the height of the chair. Lift the foot pedal to lock the chair in its current position. Want to rotate the chair again? Lightly press down on the pedal to unlock the chair. The chair can be rotated 360 degrees in both the sitting and reclining positions.
The leg rest use a mechanical system for moving them. Most chairs use a hydraulic system for moving the leg rest, but a mechanical system requires less maintenance and will last longer. Both the left and the right leg rest can be adjusted in multiple ways. Tilt the leg rest to make the client more comfortable, or turn them outwards when you need to get up close for those large back pieces.
The arm rest and back rest are adjusted differently. The armrests can be adjusted in height or removed completely by turning the knob on the side of it. The backrest has a handle to release it from its current position. It can be adjusted to multiple angles, straight for a sitting position or flat when the client needs to lay down.
The head piece has an extra cushion attached to it. The cushion offers extra comfort for your client, but can also be removed to leave a hole in the head piece for the straddle position. A footrest has been added at the back of the chair for your client to put their feet on when sitting in a straddle position. The hole in the headpiece is also great when clients are laying face down. For these sessions, a small platform has been added just below the headpiece where the client can put their phone or book. This way, the client can lie down for hours without any problems.
We will contact you by telephone about an appointment for delivery.
Key Features:
Made from Faux leather Can be rotated 360 degrees Extra thick cushions for comfort The backrest can be completely flattened Leg rest use a mechanical system that will last longer Can be used as a chair or massage table Has wheels and a handle attached to the frame for moving the chair A few products are available that perfectly compliment this chair, the Armrest Pro and the Professional Saddle Stool or Tabouret Stool.
Dimensions:
Chair: 177.5 cm x (length) x 80 cm (width) Backrest: 80 cm (length) x 37.5 cm (width) Seat: 45 cm (length) x 50 cm (width) Leg support: 50 cm (length) x 27.5 cm (width) Lowest seat position: 61 cm Highest seat position: 78.5 cm
System The chair has a hydraulic system that consists of cylinders. The pumping motion in the system will cause the pistons in the cylinders to push out the liquid and move another part. With a pumping motion, you can adjust the height of the chair. Holding down the foot pedal lowers the height of the chair. Lift the foot pedal to lock the chair in its current position.
The leg rest use a mechanical system for moving them. Most chairs use a hydraulic system for moving the leg rest, but a mechanical system requires less maintenance and will last longer.
The arm rest and back rest are adjusted differently. The armrests can be adjusted in height or removed completely by turning the knob on the side of it. The backrest has a handle to release it from its current position. It can be adjusted to multiple angles, straight for a sitting position or flat when the client needs to lay down.
Dimensions Chair: 177.5 cm x (length) x 80 cm (width) Backrest: 80 cm (length) x 37.5 cm (width) Seat: 45 cm (length) x 50 cm (width) Leg support: 50 cm (length) x 27.5 cm (width)
Working height The lowest seat position is 61 cm off the ground. This height is compatible with most saddle or tabouret stools. The highest seat position is 78.5 cm off the ground.
Coating &amp; Cleaning Hygiene is most important, and therefore the cover is made of faux leather so that it is easy to clean after each session and will not easily damage. Only use lukewarm water and green soap. Do not use strong detergents and alcohol to clean the upholstery.
Mounting The chair is delivered disassembled via pallet delivery. You must therefore be present at the delivery address for the delivery. We will make an appointment by telephone with you before shipment. An instruction manual is included on how to assemble the chair yourself.

This artist chair by Tat Tech is a great addition to any studio. Featuring a stylish design with black finish and thick cushions for extra comfort. The chair can be adjusted in different ways to fit your working position. The chair itself and the backrest are both height adjustable. You are also able to use this chair sitting in a reverse position, the backrest will become a stomach or chest support. A great way to relieve back pain while working long tattoo sessions.
Technical Specifications:
Lowest position: 50.8 cm Highest position: 68.5 cm Maximum weight: 110 kg Reclinable Backrest: Yes Weight of the chair: 8.6 kg

This armrest features two legs making it extra stable. Both the height and tilt angle of the padding can easily be adjusted. The padding is easy to clean and made from extra thick foam making it comfortable for your clients.
Key Features:
Steel Frame Adjustable Height: 62 - 95 cm Adjustable padding tilt angle: 180°
Technical Specifications:
Maximum Weight: 114 kg Pad Dimensions: Length - 50 cm / Width - 36 cm / Thickness - 4 cm
Please note: Holes are not pre-drilled, the underside of the pad must be screwed onto the base. Screws are included with the armrest.

This dual LED floor lamp is a great addition to any studio, allowing you to set the light up exactly how you need it. The base of the lamps features a tri pod design that can be adjusted to fit any surface and stay stable upon it. It has two lamps attached to flexible arms that can be adjusted in any position. With the combination of the two lamps you can ensure shadow free light. By using a simple turn knob both the brightness and colour temperature can be adjusted. Easily view your settings on the digital display above the turn knob. The brightness can be adjusted between 1% and 100% and the colour temperature can be adjusted from 3000k (warm white light) to 6000k (cool white light) In between the lamps is a mobile phone holder attached to a flexible goose neck, it's size can be adjusted to fit any size phone.
Need to charge your phone while working? This lamp allows you to run your cable to a USB input on the digital display which allows you to charge your device. For those on the move a lot, this lamp is lightweight and comes with a carry bag included. Together with the carry bag the lamp only weighs 3.4 kg. Store your lamp away in this tailor fit bag and protect it while traveling.
Included:
Two LED Lamps Tripod Stand Mobile phone holder Power adapter for the lamp Manual (USB cable for charging mobile device not included)
Key Features:
Dual Lamp Setup Tripod Base Mobile phone holder Flexible goose neck attachment arms Lightweight and portable Weight carry bag included (3.4 kg)
Technical Specifications:
Voltage: 110 v / 220 v Power Wattage: 40 w CCT (Colour Temperature): 3000k - 6000k CRI: RA&gt;90 Size: Both the height and space the tripod needs can be adjusted to fit your needs.

Please note: The delivery time for this product is 3 to 5 business days
The Hydraulic Pro Lite is lighter and has a thinner hydraulic base than the Hydraulic Pro. This chair swivels 360&deg;, on top of a Heavy-duty hydraulic pump with a beautiful chrome finish. The thinner base allows the operator to get in closer to the client. The back rest can be manually adjusted from a flat position to an upward 65&deg; angle. The leg rest can be manually adjusted from a flat position to a downward 45&deg; angle. For easy transitioning, it has fully removable arms. For a face down position, simply remove the pillow to expose a comfortable face hole.
Product Features:
<ul>
<li>Thinner heavy-duty hydraulic lift pump</li>
<li>Chrome finished hydraulic pump</li>
<li>Manually adjustable back rest and leg rest</li>
<li>Removable arm rests and pillow</li>
<li>Facial hole for face down positioning</li>
<li>Rotates 360&deg;</li>
<li>3 year structure and frame warranty (does not apply to wear and tear parts such as vinyl, hydraulic pump or click locks)</li>
<li>1 year hydraulic warranty</li>
</ul>
Specifications:
<ul>
<li>Upholstered in PVC vinyl</li>
<li>Hydraulic pump has a 1.1" (2.79 cm) shaft diameter with a 7.7" (19.56 cm) stroke</li>
<li>Height adjustment from 24" to 30"</li>
<li>Back rest adjustment from 0&deg; flat to 65&deg; incline upward</li>
<li>Leg rest adjustment from 0&deg; flat to 45&deg; downward decline</li>
<li>Rotates in horizontal direction and locks in location with foot level</li>
<li>Capacity 400 lbs (181.44 kg)</li>
</ul>
Product Dimensions:
<ul>
<li>Default position: 69" x 32" x 24" (L x W x H) (175.26 x 81.28 x 60.96 cm)</li>
<li>Arm rest width: 4" (10.16 cm)</li>
<li>Cushion thickness: 4" (10.16 cm)</li>
<li>Hydraulic base: 42" x 21" (L x W) (106.68 x 53.34 cm)</li>
<li>Weight: 169 lbs (76.66 kg)</li>
</ul>
* Default position: Bed completely flat, lowest position, w/arms * All heights measured from ground to top of seat cushion
Shipping Dimensions:
<ul>
<li>Quantity: 2</li>
<li>Package A: 43" x 13" x 26" (L x W x H) (109.22 x 33.02 x 66.04 cm)</li>
<li>Package B: 47" x 25" x 15" (L x W x H) (119.38 x 63.5 x 38.1 cm)</li>
<li>Package A weight: 91 lbs (41.28 kg)</li>
<li>Package B weight: 78 lbs (35.38 kg)</li>
</ul>

Please note: You will be contacted by phone to schedule the delivery of this product.
The Professional PRO Workstation is an addition to our "in house" brand 'Professional'. Next to the Professional Client and Artist chairs and stools we offer an extensive workstation in a sturdy, matte black version. The trolley has a number of fine extras to make the most of your working area and to keep it organised. We have taken sufficient storage space into account by adding the two drawers and lockable cabinet. Extra add-ons are included for storing specific products at the sides of the cabinet.
Key Features:
Matt black Dimensions: Maximum width: 87 cm / Maximum length: 33 cm / Maximum height: 73.7 cm Weight: 21 kg Separate magnetic add-ons for expansion storage space Two drawers Spacious cabinet with two doors Includes a lock on the cabinet doors Lockable swivel castors Read more about this unique work table and its extensive dimensions below.
Are you looking for a compact but extensive work table for your studio? Our PRO workstation is mobile and has lockable swivel castors. On the left side of the cabinet is a handle and on the right is a compartment attached. On top of the worktable is a removable rubber mat. Separate elements are supplied for neat storage of bottles, ink, paper rolls, machines, etc. These extra loose parts are attached with super strong magnets. This allows you to determine the perfect location of the bottle holder, storage tray and paper roll holder yourself. On the right side of the trolley, you can place the provided hooks in the openings and neatly store your machines and cables. In addition the cabinet has two drawers with a cabinet with 2 doors underneath, including a lock with key.
On the left side of the cabinet is a wide handle to drive the station to the desired location. When you have placed the cabinet in a prominent location in your studio, easily lock the swivel castors in place and it’s ready for use!
Work Surface
Width: 60,5 cm / 23.82 inch Length: 32.5 cm / 12.80 inch
Trolley (including handle and attached right compartment)
Width: 78,8 cm / 31.02 inch Length: 33 cm / 12.99 inch
Trolley (including separate compartments on the left and right side)
Width: 87 cm / 34.25 inch Length: 33 cm / 12.99 inch
Height (including wheels): 73.7 cm / 29.02 inch Height (excluding wheels): 64.5 cm / 25.39 inch
Weight: 21 kg
Cleaning Instructions:
Clean with lukewarm water and a little bit of green soap. Do not use strong detergents or alcohol.

Looking for a strong and sturdy armrest? Need it to be portable enough for traveling and conventions?  Tattoo Addict Customs has you covered with this portable armrest. The frame is made out of steel with a powder coated black finish. Easy to adjust the height and tilt angle of the padding with a simple turn of a knob.  Extra thick foam padding makes it comfortable for your clients.
Key Features:
Steel Frame Powder Coated Black Finish Adjustable Height Adjustable Padding Tilt Angle Technical Specifications:  Maximum Height: 1.2 meters Pad Dimensions: Length - 60 cm / Width - 30 cm / Thickness - 5 cm

Please note: You will be contacted by phone to schedule the delivery of this product.
The Professional Client Chair is a unique product within the tattoo industry and on our website. This customer chair is an inhouse production from Tattooland Supplies.
The chair has a hydraulic system that consists of cylinders. Due to the pump movement in the system the pistons in the cylinders will push away the liquid and another part will be moved. This makes the seat height adjustable by means of a foot pump. The footrests are adjustable in length and can also be removed completely.
By means of a gas spring, the footrests can be adjusted to any desired angle. The armrests can be adjusted in height by a rotary knob or can be removed completely. The backrest can be completely flattened with a lever. You can also choose to place the backrest at a different angle to the rear and lock it.
On the head piece is an extra cushion, when you remove it you will be left with a headrest with a round hole in it for the straddle position. For extra comfort in this position, there is a footrest at the back of the chair where the customer can rest their legs. The chair can be rotated 360 degrees from left to right.
Specifications:
The chair has a size of 195 cm (length) x 82 cm (width) x 70 - 84 cm (height - adjustable) The lowest chair position is 70 cm high. The highest chair position is 84 cm for standing work. Rotation: 360 degree horizontal rotation Backrest: the backrest can be completely flattened down Extras: The professional chair can be extended with the Armrest Pro, Professional Saddle stool or Tabouret stool.
Read more about the original Professional Client chair below.
Coating &amp; Cleaning
Hygiene is important, therefore the cover of the chair is made out of faux leather which is easy to clean after each session and will not easily damage. Use lukewarm water and green soap only! Do not use strong detergents and / or alcohol to clean the upholstery.
Colours &amp; Extra's
Our range of client chairs consists of different colours and is continiously expanded with new combinations for you to pick from. The chair can be expanded with the Armrest Pro. This armrest is specifically designed for the Professional Client Chair and can be easily mounted. One of the excisting armrest will be replaced creating a larger working surface and extra customer comfort. Just like the regular armrest this one can be adjusted in all angles.
Mounting
The chair will be delivered disassembled via pallet delivery and includes a detailed manual with instructions on how to assemble the chair.

Armrest Professional.
Minimum Height: 22.4 inches Maximum Height: 37.8 inches Pad Dimensions: (Inches) 9.4 (L) x 7 (W) Pad Thickness: 0.8 inches

Studio

Dynamic Platinum is a collection of tattoo ink designed to fully comply with REACH regulations. All colours from the Dynamic Platinum range comply with strict regulatory guidelines, ensuring their safety and suitability for a wide range of tattooing applications.
Dynamic's tattoo inks are vegan-friendly and cruelty-free, reflecting their commitment to ethical practices. By avoiding animal-derived ingredients and testing, Dynamic aligns with the increasing demand for vegan products in the tattoo industry.
High-Quality Pre-Dispersed Inks, The Dynamic Platinum Tattoo Colour Range features premium tattoo inks renowned for their exceptional pigment concentration. Formulated for a smooth flow rate, these inks are ideal for various tattooing tasks, facilitating a smooth application and efficient healing. This results in vibrant, long-lasting tattoos that maintain clarity and brightness, enhancing client satisfaction.
In response to the issue of counterfeit products, Dynamic Platinum Tattoo Inks come in transparent PET bottles, sealed with a holographic label that features the Dynamic Color logo. This serves as an anti-counterfeiting measure, ensuring authenticity. Additionally, the sterilized condition of the product is guaranteed by heat seals marked with the Dynamic Color approval stamp.
Key Features:
Complies with REACH regulations Vegan-Friendly and Cruelty-Free High-Quality Pre-Dispersed Inks Formulated for a smooth flow rate Exceptional pigment concentration Efficient application and healing Vibrant, long-lasting results Anti-Counterfeiting Packaging

Introducing Intenze GEN-Z, a line of tattoo inks that complies with REACH and EU guidelines. Intenze is a brand that have been around for years and the inks are used by artist worldwide. The line consists of bright and vibrant colours and all inks are vegan-friendly.

Black XXX Tribal is Panthera's darkest black. A black that stays black due to its very high pigment concentration. An all-round black used for lining, shading and filling.
Panthera Ink is known for its black, white and grey tattoo inks. Their greywashes are also used by many artists worldwide. The brand has been around for 20+ years and was founded by former tattoo artists with over 25 years of experience tattooing.
Panthera Ink is vegan-friendly and cruelty-free. All newly added inks comply with REACH and EU guidelines.

Union Black is an alternative to Dynamic Black that meets REACH and EU guidelines. This black tattoo ink is suitable for lining, filling in and can be diluted to create lighter shades.

World Famous Ink was founded in 2012 and is one of the world's most revolutionary tattoo ink brands. A brand that is known for its superior ink quality. With the introduction of World Famous Limitless, tattoo artists can continue to create masterpieces without limitations. All World Famous Limitless tattoo inks comply with REACH and EU guidelines.

Kuro Sumi is an ink brand originally from Japan and has been around for over 20 years. All Kuro Sumi inks have been tested by world renowned artist for performance, colour clarity and easy of use. With the introduction of Kuro Sumi Imperial, tattoo artist can continue to use inks from their favorite brand. All Kuro Sumi Imperial tattoo inks comply with REACH and EU guidelines.

#0 White Rutile Paste by I AM INK is a white that owes it name to the highest quality of all titanium dioxide modifications, rutile.
White Rutile Paste is one of the whitest and most visually opaque pigments. A white that is perfect for highlights.
Key Features:
Vegan-friendly and cruelty-free EU Resolution ResAP (2008) 1 compliant Inspection window for content control Made in Austria

Tattoo Ink

The Mast Fold Pro is a multifunctional Tattoo / PMU machine that offers the versatility to change the stroke length on the fly through a control dial. Designed for both wireless operation via its battery pack and wired use with the included RCA connector, this pen-shaped rotary machine features a click-mechanism grip for adjusting needle depth and an intricate gear system for smooth ink dispensing. With its adjustable stroke length, the Fold Pro is suitable for all Tattoo and PMU procedures.
Equipped with a Mcore-C2 coreless motor, the Pro Mast Fold introduces an automatic jump-start function, accommodating even the largest needle cartridge setups. This feature activates automatically when the machine is powered on. Furthermore, it includes two removable wireless battery packs with USB-C ports for quick charging (cable included) and an RCA adapter for wired usage (RCA cable sold separately). The needle depth is easily adjustable by twisting the click-mechanism grip, and the machine is compatible with all universal, Cheyenne-type needle cartridges.
The Mast Fold Pro also incorporates an intuitive LED screen on its side, displaying the working voltage and remaining battery life in real-time. Two buttons located below the screen enable rapid voltage adjustments. Powered by a 1500mAh lithium battery, the machine operates within a 5-12V working voltage range, providing up to 5 hours of continuous operation (depending on usage) after a mere 1.5-hour charge. The inclusion of an extra battery ensures uninterrupted power during sessions.
Measuring 128 mm in length and with a diameter of 32 mm, the Mast Fold Pro weighs a comfortable 200 grams. Its balanced design minimizes fatigue, allowing for extended tattooing sessions.
Key Features:
<ul>
<li>Variable stroke with 7 adjustable lengths</li>
<li>Includes a spare battery pack for extended usage</li>
<li>Powerful, precise, and quiet wireless Tattoo / PMU machine</li>
<li>Wireless and wired operation via the included RCA adapter</li>
<li>Automatic Jump-start feature for handling large cartridge configurations</li>
<li>Click-action grip for convenient needle depth adjustment</li>
<li>Compatibility with universal, Cheyenne-type needle cartridges</li>
<li>Up to 5 hours of battery life, depending on usage</li>
<li>Precise voltage adjustments, with increments of 0.1V</li>
<li>Includes a USB-C charging cable</li>
</ul>
Technical Features:
<ul>
<li>Stroke length: Adjustable on the fly (2.4 / 2.7 / 3.0 / 3.3 / 3.6 / 3.9 / 4.2 mm)</li>
<li>Working voltage: 5-12V</li>
<li>Grip size: 32 mm</li>
<li>Length: 128 mm</li>
<li>Weight: 200 grams (with either attachment)</li>
<li>Powered by a 1500mAh lithium battery</li>
</ul>

The Critical Tattoo® Torque Pen is a pen-style tattoo machine engineered for remarkable precision and efficiency. It boasts the industry's first Precision Strike Technology, allowing you to tattoo with unprecedented speed and silky smoothness. The Torque Pen is powered by a high-efficiency German brushless motor that provides this machine with unparalleled torque and power.
This powerful machine has a vibration dampening system to provide maximum comfort. Reducing vibrations to a minimum and helping to reduce hand fatigue during long sessions. This pen-style tattoo machine truly makes tattooing feel effortless.
Suited to every artist's needs, the Torque Pen is suitable for a range of tattoo styles. Whether your style involves delicate linework or bold lines and colouring, the Torque Pen's two stroke lengths (3.5 mm, 4.2 mm or 5.0 mm, non-interchangeable) cater to your specific needs.
Powering the Torque Pen is the sophisticated Critical Connect V3 Battery Pack, featuring a user-friendly LED interface. Track your session time, adjust your voltage, or view your hourly rate, all with a simple glance. Designed for long-lasting performance, the battery lasts up to 8 hours, depending on usage. When it's time to recharge, the included 60 cm USB-C Charging Cord ensures a hassle-free charging process.
What’s included in this set:
1 x Critical Torque Pen Machine 2 x Critical Connect V3 Battery Packs 1 x Critical Dual Battery Dock with USB-C Cord 1 x 34 mm Grip 1 x 40 mm Grip 1 x RCA Adapter 1 x RCA Cord 1 x Travel Case 1 x QR Code Card to Critical Torque Resources
Key Features
Features the innovative Precision Strike Technology for fast and smooth tattooing Powered by a custom German brushless motor for superior power and torque Advanced vibration dampening system for a comfortable tattooing experience Two stroke lengths available: 3.5 mm, 4.2 mm or 5.0 mm (non-interchangeable) Equipped with the Critical Connect V3 Battery Pack that features an intuitive LED interface Up to 8 hours of battery life depending on usage Compatible with the Critical Connect Foot Switch Battery has an option to track time Bluetooth 5.0 enabled
Technical Features:
Stroke lengths: 3.5 mm, 4.2 mm or 5.0 mm (non-interchangeable) Grip Size: 34 and 40 mm Dimensions (Ø x L): 34 mm (37 mm with battery pack) x 131 mm Weight: 176 grams with the 34 mm grip and battery pack included Weight: 204 grams with the 40 mm grip and battery pack included

The Fly V3 from Elite is a wireless pen-style machine with a display on the front of the machine.
This machine is powered by a single Panasonic NCR 18500A 2040 mAh rechargable battery that will allow you to work for approximately 6 to 10 hours. A battery charger is included with the machine for charging the battery. The machine has an LED display and buttons on the front of the machine. While working, you can see what voltage is selected and how long the remaining battery life.
The Fly V3 has a jump start function to give the machine extra power when turned on. Thanks to this function, the machine can be used with almost all brands of needle modules and sizes.
How does the machine work:
All functions are operated with the use of four buttons.
Turn the machine on or off by holding the power button for three seconds. The machine will or stop running when the power button is pressed again.
Press the + and - button simultaneously to switch on the jump start feature. The display will show a small lightning bolt when this feature is turned on.
The + and - buttons are used to change the voltage. The voltage of the machine can be adjusted from 4 to 12V in 0.1 volt increments.
With the Fly V3 you can save up to 4 voltage presets. To use this function press the preset button, select your desired voltage and save by pressing and holding the preset button for 3 seconds.
Included with the machine:
2 Panasonic NCR 18500A 2040 mAh Rechargeable Batteries. 1 Battery Charger with USB-A cable.
Technical Specifications:
Direct Drive Operating voltage: 4 - 12V Stroke: 4 mm Dimensions (&Oslash; X L): 33.5 mm x 125 mm Grip size: 33.5 mm Weight with battery: 210 grams

The Flux Max is a state-of-the-art tattoo machine that learns how you like to work and automatically adapts to give you more control and convenience. It learns from the settings you choose, your choice of ink and needles and even the amount of pressure you apply. The Flux Max senses and optimizes to give you a smooth controlled feel.
The PowerBolt of the Flux Max has been upgraded. It now features a digital display with fully built-in menu, all settings previously available through the app only can now be adjusted through this menu. Change the speed of your machine through Volts or now Hertz for improved accuracy. Enable features, view your remaining battery life and use the built-in timer to track your sessions. Prefer to use the mobile app? The app will remain available for customers to download and use to change their settings.
The Flux Max features an ergonomic grip that has been redesigned for more comfort and control. Already using the EXO or Flux machine and prefer that grip? No problem, this machine is compatible with both those grips. Not only the grips are compatible with this machine, existing PowerBolt, PowerBolt+ batteries and the Killswitch can be used with the Flux Max.
Need even more control? More responsive eGive levels have been added to give you exactly that. The Flux Max can also be used with a lower voltage / hertz speed, working with a speed as low as 4 volts / 66 hertz.
Key Features:
Three available stroke options: 3.2 mm, 4.0 mm and 4.5 mm. Durable machine with newly designed grip for maximum comfort. Fully Built-In Digital menu with the same features found in the mobile app. Detachable battery and compatible with the existing PowerBolt and PowerBolt+ batteries. This machine can also be used with the grip from the EXO or Flux machine. Improved wireless connectivity and range. Pair the machine with the Darklab mobile app for adjusting settings or machine updates. Charge the machine through the USB-C port using the included USB-C cable. Built-In Time Tracker for trackign time during sessions. Three responsive eGive levels to choose from (0-3). Dynamic Power Path Management for reliable and consistent power levels.
Technical Specificatons:
Battery life: 10 hours of life (depending on the speed used) with only 2 hours of charging time when using the included cable. Voltage: 4-12 volt / 66-199 Hertz, can be changed in increments of 0.1 or 0.5. Grip: 38 mm Weight: 205 grams

Bishop Rotary has collaborated with Critical to create the Power Wand wireless machine set. This set combines the popular Wand machine from Bishop with one of the best wireless power supplies from Critical.
The Power Wand can be used with either an RCA cable or the wireless batteries, this way you will never run out of power. Simply detach the RCA adapter and connect the wireless power supply from Critical to use the machine wirelessly.
These wireless batteries use a magnetic connection that is quick and easy to attach and remove from the Power Wand.
This set includes the following:
Bishop - Packer Power Wand (4.2 mm) Bishop - 7 ft long grey RCA cord Critical - Power Wand Battery Pack Critical - Power Wand Shorty Battery Pack Critical - Universal Battery Charging Dock Critical - Universal Dock Wall Adapter A 6 ft USB charging cord for the charging dock A travel case that can hold everything included in the set
The Power Wand included with this set:
The Bishop Packer Power Wand is perfect for bold lines, colour realism, traditional style work and even smooth black &amp; gray work.
The Packer Power Wand features a 4.2 mm stroke and brushed Faulhaber motor with custom winding made specifically to provide more torque and speed.
The machine has a beautiful design, a matte black finish that feels smooth to the touch and a hand polished copper band to finish of the look. The Bishop Power Wand has a fully autoclavable grip that is designed to fit comfortably in your hand which helps to reduce pain and fatigue.
This long-awaited addition to the Bishop Machine range is the perfect all in one machine for any artist and has an appealing look to create the perfect combination.
Technical Features:
Faulhaber brushed motor Custom winding made specifically to provide more torque and speed. Fixed 4.2 mm stroke Aircraft grade aluminium RCA connection 1 year Bishop warranty Made in the USA Recommended voltage: 7 v – 9 v Dimensions: 95 mm x 30 mm Weight: 113.4 grams

A wireless tattoo machine with the functions of a power supply build into the machine.
This machine gives you freedom of movement by eliminating all necessary cables. The machine can be operated with just three buttons. The display on the machine is used to show your current voltage and to indicate the remaining battery life. A third indicator will show if the remaining battery power is below 10%. Through the settings menu, you can set your billing rate and have the machine calculate your fee based on how long you have been tattooing.
The machine is powered by a 2200 mAh Li-lion battery that gives you around 8 to 12 hours of working time. The batteries require around 6 hours of charging time from empty to full. Two batteries and a charger are included with the machine. The empty battery is easy to replace. Unscrew the back of the machine and change the batteries.
How does the machine work:
All functions are operated with the use of three buttons.
Hold the power button for three seconds to turn the machine on or off. Press the button again to start or stop the machine. Press the button twice to change what is shown on the interface, after 5 seconds the display will automatically change back to indicating the voltage.
Press the + and - button simultaneously for two seconds to access the billing mode feature. Set your billing rate and hold the power button for 2 seconds to save. The machine remembers your settings even when the machine is turned off or the battery is replaced. Pressing the power button and - button simultaneously for a few seconds will clear all data.
The voltage of the machine can be adjusted from 4 to 12V in 0.2 volt increments.
Included with the machine:
2 Rechargeable 2200 mAh Li-lion Batteries. 1 Battery Charger with USB-A cable.
Key Features:
A quiet machine with low vibrations. Freedom of movement, no cables that can get in the way.
Technical Specifications:
Direct Drive Operating voltage: 4 - 12V Stroke: 4 mm Dimensions (&Oslash; X L): 32 mm x 132 mm Grip size: 32 mm Weight without battery: 184 grams Weight with battery: 208 grams

The Spektra Flux is a premium pen-style machine to kickstart the wireless future of tattooing!
The Flux features a detachable PowerBolt battery that fits perfectly on to the pen. This gives it an ergonomic and lightweight design with all the weight in the center to reduce strain in your arm. The machine has 3 buttons to control everything making it very easy to use. The LED indicators on the Flux allow you to quickly see your current voltage settings or remaining battery life. The battery will last up to 10 hours and only needs 1.5 hours of charging when empty. We also sell a combo pack with an additional PowerBolt battery included for artists who either work longer sessions or just want the safety of never running out of battery power.
The Spektra Flux has Bluetooth capabilities, it allows you to connect your phone to it and use the Darklab Android or IOS application. Through the app you are able to check the time you have been tattooing, change your voltage using voice commands, update the battery pack and much more.
Embrace the wireless revolution and create your masterpieces without cables getting in the way!
Key Features:
Ergonomic, lightweight wireless pen-style machine Most of the weight placed in the center to reduce strain in your arm Coloured LED indicators allow for the monitoring of voltage settings and battery life Dynamic Power Path Management ensures stable power at all times. Detachable battery allows you to switch between Powerbolts (Extra Powerbolt is sold seperate or can be bought with the Flux in a combo pack) Bluetooth compatible, connect to the app and use the many features such as changing voltage through voice commands Charge the battery pack through any USB-C port found in cars, airports or laptops. Great for the traveling tattoo artist Battery life: 10 hours of life with only 1.5 hours of charging time Compatible with all cartridge modules Direct Drive Grip: 33 mm Stroke: 4 mm (Great for lining and colour packing, all-round machine) VoltageL: 5 - 12 volts, can be changed in increments of 0.5 Weight: 178 grams

The SOL Nova Unlimited is Cheyenne's first machine that has the functions of a power supply build into the tattoo machine!
This machine has all the great features of the regular SOL Nova but now allows for complete freedom of movements through cordless operation. The machine works through a single button and features two operating modes. Steady mode for a constant hit or the responsive mode which adapts to the surface it works on.
The machine runs on a rechargeable battery that delivers a minimum of 5 hours running time and needs only 3 hours of charging time. If your machine runs out of power during a session you will be able to easily replace it with the second battery that is included with this machine.
The SOL Nova Unlimited includes two Panasonic NCR18500A cell batteries. If you require more than two you are able to purchase these from most stores that sell batteries.
Included with the machine:
Cheyenne's Protective Case 2 Recharchable Batteries Charging cable for the batteries
Key Features:
Cheyenne-typical, quiet and low-vibration operation Complete freedom of movements, no cables required 2 operating modes: Steady Mode (hit/frequency: constant) and Responsive Mode (hit/frequency: reactive) Minimum 5 hours running time with only 3 hours charging time (at 5V and min. 2A) Compatible with D-Grips Ergo One Inch and Ergo Round
Frequency: 25 to 140 hz Adjustable needle depth: (0 - 4 mm/0 - 0.16 inch) Dimensions (Ø X L): 33 mm / 1.3 inch x 125 mm / 4.9 inch Weight without battery: 152 grams / 5.4 oz Weight with battery: 184 grams /6.5 oz
Manufactured according to medical standard (ISO 13485) Made in Germany

The Ghost Reaper Pen is the perfect all-round machine, producing soft shades when needed, but also great for solid fill and crisp lines.
Colours Available:
Aztec Gold (Limited Edition) Hematic Red Obsidian Black Soulless Silver
Technical Features:
Speed: 10,000 RPM Input: Maximum 12v Connection Type: RCA Stroke: 3.5 mm Motor: 4.5w Body: Aluminium Length: 120 mm Diameter: 28 mm Weight: 130 grams
Important Information:
The Reaper is pre-lubricated, do not over lubricate the machine to prevent damaging the motor. Always turn the motor off before switching the cartridges. Avoid backward ink flow (Do not use cartridge modules without membrane) and any moisture getting inside the motor area of your machine. Do not run your reaper outside of the recommended voltage bracket to avoid overworking your machine. Recommended Voltage: 6 to 12 Volts.

Tattoo Machines

The D-Master V2 lets you experience the pinnacle of comfort and ergonomic design. This beautifully designed chair has a black finish and offers endless adjustability options to cater to your individual working posture. Both the back/chest rest and seat cushion are filled with a combination of HR Foam and NASA memory foam, guaranteeing optimal comfort and shaping to your body for better support.
The D-Master V2 is designed to cater to your individual working posture. It features adjustable settings for the angle of the seat and the back/chest rest. The height of both can be effortlessly adjusted according to your preference, ensuring you maintain an optimal and healthy posture throughout your session.
To further enhance the chair's durability and aesthetic appeal, the D-Master V2’s fabric is a black vinyl fabric called “Valencia”. This fabric is known to be one of the toughest vinyls available and guarantees longevity and a sleek, professional finish to complement any studio interior. Furthermore, this chair is equipped with extra silent 60 cm caster wheels.
Key Features:
Ergonomic chair with an elegant design to fit any studio Fully adjustable, designed to meet the needs of your working posture Exceptional comfort with a combination of HR and NASA memory foam padding Unique feature of a reversible backrest that provides support for either the back or chest Wrapped in “Valencia” black vinyl fabric that is durable and guarantees longevity Extra silent 60 cm caster wheels to prevent scratches on the floor and noise distractions
Technical Specifications:
Lowest position: 46 cm Highest position: 66 cm Seat dimensions (DxWxT): 39 (depth) x 46 x 8 cm (cushion thickness) Back/Chest Rest dimensions(WxH): 22 x 28 cm Base dimensions: 60 cm diameter Wheel dimensions: 6 cm Max weight: 150 kg
Cleaning Instructions:
Clean with lukewarm water and a bit of green soap. Do not use strong detergents or alcohol.

This 1200 mAh battery pack is a replacement / spare battery for your Dragonhawk - Mast Tour Y22 - Wireless Tattoo Machine
The Mast Tour Y22 battery pack incorporates an intuitive LED screen on the top of the machine, displaying the working voltage and remaining battery life in real-time. Two buttons located below the screen enable rapid voltage adjustments. Powered by a 1200mAh lithium battery, the battery pack operates within a 5-12V working voltage range, providing up to 5 hours of continuous operation (depending on usage) after a mere 1.5-hour charge. The battery pack also features a USB-C ports for quick charging (cable included).
Key Features:
<ul>
<li>LED screen displaying working voltage and remaining battery life</li>
<li>Up to 4 hours of battery life, depending on usage</li>
<li>Precise voltage adjustments, with increments of 0.1V</li>
<li>Includes a USB-C charging cable</li>
</ul>
Technical Features:
<ul>
<li>Working voltage: 5-12V</li>
<li>Weight: 54 grams</li>
<li>Battery capacity: 1200mAh</li>
</ul>

The Emalla Eliot Tattoo Cartridges are crafted using only the best materials available. The needles are made from premium quality Japanese stainless steel, known for its strength and longevity. Each needle undergoes a comprehensive series of checks both during and after manufacturing. This rigorous quality assurance process ensures that every needle meets the highest professional standards, ensuring reliability and consistency each time.
The Eliot tattoo cartridges feature a safety membrane, an essential feature that prevents ink flowing back into the tattoo machine. Additionally, they are equipped with a stabilizing bar. This bar plays a crucial role in ensuring that the needles remain steady during use.
Key Features:
<ul>
<li>The needles are made from strong and durable Japanese stainless steel designed for lasting quality</li>
<li>Safety membrane to prevent ink flowing back into the machine</li>
<li>The stabiliser bar prevents the needles from moving and ensures precision</li>
<li>The casing of the cartridge is made from medical grade PC material</li>
<li>Sterilised using EO Gas and made using lead-free solder, ensuring safety and hygiene</li>
<li>Each cartridge needle is individually packed in a blister pack, maintaining its sterility until use</li>
</ul>
Configurations:
Round Liners Primarily used for creating outlines. The Emalla Eliot Round Liner Cartridges are available in a range of diameters, starting from 0.25 mm for fine, pencil-like outlines, up to 0.44 mm for broader lines.
Round Shaders Celebrated for their adaptability in shading techniques. The Emalla Eliot Round Shader Cartridges excel in producing fine, even blends on a variety of skin types.
Magnums Suitable for both small and large tattoos. The Emalla Eliot Magnum Cartridges are available in a variety of options suitable for dense colour filling and achieving superior shading and colour gradients.
Soft Edge Magnums Also referred to as 'curved' or 'rounded' Magnums. The Emalla Eliot Soft Edge Magnum Cartridges serve multiple purposes, from ultra-smooth shading to crafting realistic tattoos.
Stipple Shaders Perfect for dotwork, whip shading, and textured shading effects. The Emalla Eliot Stipple Shader Cartridges use a 3x3 configuration, consisting of three groups of three needles arranged in a round liner formation. This unique needle setup improves ink flow and shading efficiency, making it ideal for achieving smooth saturation and consistent dotwork.
Tapers:
Long Taper This taper is the preferred choice for most tattoo artists. Suitable for all needle configurations. This taper option is compatible with all needle configurations.
Medium Taper Favoured particularly in the Old School tattoo scene, the Medium Taper is known for its adaptability. It, too, can be used with all needle configurations, offering flexibility in various tattooing styles.

The Shorty version of the Bishop x Critical Advanced Battery Pack is the compact model in the Power Wand Advanced lineup, delivering up to 6 hours of battery life, an improvement over the previous 5-hour capacity. Lightweight and low-profile, it&rsquo;s ideal for shorter sessions or artists who prefer a lighter setup.
The Bishop x Critical Advanced Battery Pack is designed specifically for the Power Wand series. It connects magnetically and sits flush with the machine&rsquo;s backplate, maintaining a streamlined, ergonomic setup.
The upgraded battery includes a TFT full-colour display and an intuitive 5-button interface, offering real-time readouts of voltage, frequency (hertz), battery life, and run time. A built-in Jumpstart function delivers additional power on startup, ideal for larger cartridge configurations, while the Snap Connector system ensures a secure fit using a steel ball bearing and dual rubber washers.
Both versions of the Advanced Battery Pack are Critical Connect-enabled, making them compatible with the Critical Connect Foot Switch for wireless foot control. Charging is supported via the Critical Universal Battery Charging Dock or a USB-C cable (USB-C cable included).
Key Features:
<ul>
<li>Designed for use with Bishop Power Wand machines</li>
<li>Magnetic, flush-mount battery connection</li>
<li>Full-colour TFT screen with 5-button layout</li>
<li>Real-time display of voltage, hertz, battery level, and run time</li>
<li>Jumpstart On/Off function for large cartridge startup</li>
<li>Snap Connector system with steel ball bearing and dual rubber washers</li>
<li>Critical Connect-enabled (compatible with Critical Connect Foot Switch)</li>
<li>Charges via Critical Universal Dock or USB-C cable (USB-C cable included)</li>
</ul>
Technical Specifications:
<ul>
<li>Battery life (Shorty): Up to 6 hours runtime (depending on usage)</li>
<li>Battery life (Standard): Up to 15 hours runtime (depending on usage)</li>
</ul>

The Standard version of the Bishop x Critical Advanced Battery Pack is the extended-capacity model in the Power Wand Advanced lineup, offering up to 15 hours of battery life, a 5-hour increase over the previous generation (10 hours).
The Bishop x Critical Advanced Battery Pack is designed specifically for the Power Wand series. It connects magnetically and sits flush with the machine&rsquo;s backplate, maintaining a streamlined, ergonomic setup.
The upgraded battery includes a TFT full-colour display and an intuitive 5-button interface, offering real-time readouts of voltage, frequency (hertz), battery life, and run time. A built-in Jumpstart function delivers additional power on startup, ideal for larger cartridge configurations, while the Snap Connector system ensures a secure fit using a steel ball bearing and dual rubber washers.
Both versions of the Advanced Battery Pack are Critical Connect-enabled, making them compatible with the Critical Connect Foot Switch for wireless foot control. Charging is supported via the Critical Universal Battery Charging Dock or a USB-C cable (USB-C cable included).
Key Features:
<ul>
<li>Designed for use with Bishop Power Wand machines</li>
<li>Magnetic, flush-mount battery connection</li>
<li>Full-colour TFT screen with 5-button layout</li>
<li>Real-time display of voltage, hertz, battery level, and run time</li>
<li>Jumpstart On/Off function for large cartridge startup</li>
<li>Snap Connector system with steel ball bearing and dual rubber washers</li>
<li>Critical Connect-enabled (compatible with Critical Connect Foot Switch)</li>
<li>Charges via Critical Universal Dock or USB-C cable (USB-C cable included)</li>
</ul>
Technical Specifications:
<ul>
<li>Battery life (Shorty): Up to 6 hours runtime (depending on usage)</li>
<li>Battery life (Standard): Up to 15 hours runtime (depending on usage)</li>
</ul>

The Bishop Rotary Power Wand Advanced Liner (5.0 mm stroke) is built for precision lining, blackwork, and dotwork. It features a brushless Faulhaber motor with custom winding, developed to deliver more torque and speed. Recommended working voltage: 6&ndash;8 V.
The Power Wand Advanced Complete Set combines Bishop&rsquo;s most compact and lightweight tattoo machine with upgraded Critical Advanced batteries. The Shorty battery now offers up to 6 hours of runtime (previously 5 hours), while the Standard battery offers up to 15 hours (previously 10 hours). Available in Shader (3.5 mm), Packer (4.2 mm), and Liner (5.0 mm) configurations, each version is tailored for specific tattooing needs&mdash;from soft shading to bold colour packing and precision linework.
This set includes both the Standard and Shorty versions of the Bishop x Critical Power Wand Advanced Battery Pack. Both attach magnetically and sit flush against the machine&rsquo;s backplate. The updated battery packs feature a full-colour TFT display with a five-button interface, providing real-time readouts of voltage, hertz, battery life, and run time. A built-in Jumpstart mode assists with starting large cartridge configurations, while the Snap Connector with a steel ball bearing and dual rubber washers ensures a secure connection.
Also included are a magnetic RCA adapter for optional wired use, a Critical Universal Battery Charging Dock, and both RCA and USB-C charging cables. The Power Wand Advanced is compatible with all universal Cheyenne-type needle cartridges and Critical Connect hardware, including the Critical Connect Foot Switch. It is also backward-compatible with previous-generation Bishop x Critical battery packs.
Each Power Wand is precision-machined from aircraft-grade aluminium and finished in matte black with a hand-polished band, colour-coded by type: grey (Shader), copper (Packer), or black (Liner). Measuring just 10.9 cm in length and weighing 142 grams, the Power Wand remains one of the smallest and lightest pen-style machines available&mdash;ideal for long sessions with reduced hand fatigue.
What&rsquo;s included in this set:
<ul>
<li>1x Bishop Power Wand</li>
<li>1x Advanced Standard Battery (up to 15 hours runtime)</li>
<li>1x Advanced Shorty Battery (up to 6 hours runtime)</li>
<li>1x Bishop Power Wand RCA Adapter</li>
<li>1x Critical Universal Battery Charging Dock</li>
<li>1x Grey RCA cable (2.15 meters)</li>
<li>1x USB-C charging cable (1.8 meters)</li>
</ul>
Key Features:
<ul>
<li>Available in Shader (3.5 mm), Packer (4.2 mm), or Liner (5.0 mm) configurations</li>
<li>Brushed (Shader) or brushless (Packer/Liner) Faulhaber motor with custom winding</li>
<li>Built-in give (Shader only) for a softer, more forgiving hit</li>
<li>Aircraft-grade aluminium construction with matte black finish</li>
<li>Magnetic backplate for secure, flush battery connection</li>
<li>Full-colour TFT display with intuitive 5-button layout</li>
<li>Real-time display of voltage, hertz, run time, and battery level</li>
<li>Jumpstart On/Off function for large cartridge startup</li>
<li>Snap Connector system with steel ball bearing and rubber washers for enhanced grip stability</li>
<li>Compatible with all Cheyenne-type universal needle cartridges</li>
<li>Critical Connect-enabled (works with Critical Connect Foot Switch)</li>
<li>Backward-compatible with previous-generation Bishop x Critical battery packs</li>
<li>Optional RCA connection for wired use</li>
<li>Made in the USA</li>
</ul>
Technical Specifications:
Power Wand Machine
<ul>
<li>Stroke length: 3.5 mm (Shader), 4.2 mm (Packer), 5.0 mm (Liner)</li>
<li>Motor: Brushed (Shader) or Brushless (Packer/Liner) Faulhaber</li>
<li>Recommended working voltage (Shader): 8.5&ndash;10 V</li>
<li>Recommended working voltage (Packer / Liner): 6&ndash;8 V</li>
<li>Length: 10.9 cm</li>
<li>Weight: 142 grams</li>
</ul>
Advanced Battery Pack
<ul>
<li>Display: Full-colour TFT with 5-button interface</li>
<li>Features: Voltage, hertz, session tracking, Jumpstart function, Snap Connector</li>
<li>Charging: Via included Critical Charging Dock or USB-C cable</li>
<li>Battery life (Shorty): Up to 6 hours runtime (depending on usage)</li>
<li>Battery life (Standard): Up to 15 hours runtime (depending on usage)</li>
</ul>

The Bishop Rotary Power Wand Advanced Packer (4.2 mm stroke) is engineered for colour realism, traditional colour packing, and bold lines. It is powered by a brushless Faulhaber motor with custom winding, designed to provide more torque and power. Recommended working 
The Power Wand Advanced Complete Set combines Bishop&rsquo;s most compact and lightweight tattoo machine with upgraded Critical Advanced batteries. The Shorty battery now offers up to 6 hours of runtime (previously 5 hours), while the Standard battery offers up to 15 hours (previously 10 hours). Available in Shader (3.5 mm), Packer (4.2 mm), and Liner (5.0 mm) configurations, each version is tailored for specific tattooing needs&mdash;from soft shading to bold colour packing and precision linework.
This set includes both the Standard and Shorty versions of the Bishop x Critical Power Wand Advanced Battery Pack. Both attach magnetically and sit flush against the machine&rsquo;s backplate. The updated battery packs feature a full-colour TFT display with a five-button interface, providing real-time readouts of voltage, hertz, battery life, and run time. A built-in Jumpstart mode assists with starting large cartridge configurations, while the Snap Connector with a steel ball bearing and dual rubber washers ensures a secure connection.
Also included are a magnetic RCA adapter for optional wired use, a Critical Universal Battery Charging Dock, and both RCA and USB-C charging cables. The Power Wand Advanced is compatible with all universal Cheyenne-type needle cartridges and Critical Connect hardware, including the Critical Connect Foot Switch. It is also backward-compatible with previous-generation Bishop x Critical battery packs.
Each Power Wand is precision-machined from aircraft-grade aluminium and finished in matte black with a hand-polished band, colour-coded by type: grey (Shader), copper (Packer), or black (Liner). Measuring just 10.9 cm in length and weighing 142 grams, the Power Wand remains one of the smallest and lightest pen-style machines available&mdash;ideal for long sessions with reduced hand fatigue.
What&rsquo;s included in this set:
<ul>
<li>1x Bishop Power Wand</li>
<li>1x Advanced Standard Battery (up to 15 hours runtime)</li>
<li>1x Advanced Shorty Battery (up to 6 hours runtime)</li>
<li>1x Bishop Power Wand RCA Adapter</li>
<li>1x Critical Universal Battery Charging Dock</li>
<li>1x Grey RCA cable (2.15 meters)</li>
<li>1x USB-C charging cable (1.8 meters)</li>
</ul>
Key Features:
<ul>
<li>Available in Shader (3.5 mm), Packer (4.2 mm), or Liner (5.0 mm) configurations</li>
<li>Brushed (Shader) or brushless (Packer/Liner) Faulhaber motor with custom winding</li>
<li>Built-in give (Shader only) for a softer, more forgiving hit</li>
<li>Aircraft-grade aluminium construction with matte black finish</li>
<li>Magnetic backplate for secure, flush battery connection</li>
<li>Full-colour TFT display with intuitive 5-button layout</li>
<li>Real-time display of voltage, hertz, run time, and battery level</li>
<li>Jumpstart On/Off function for large cartridge startup</li>
<li>Snap Connector system with steel ball bearing and rubber washers for enhanced grip stability</li>
<li>Compatible with all Cheyenne-type universal needle cartridges</li>
<li>Critical Connect-enabled (works with Critical Connect Foot Switch)</li>
<li>Backward-compatible with previous-generation Bishop x Critical battery packs</li>
<li>Optional RCA connection for wired use</li>
<li>Made in the USA</li>
</ul>
Technical Specifications:
Power Wand Machine
<ul>
<li>Stroke length: 3.5 mm (Shader), 4.2 mm (Packer), 5.0 mm (Liner)</li>
<li>Motor: Brushed (Shader) or Brushless (Packer/Liner) Faulhaber</li>
<li>Recommended working voltage (Shader): 8.5&ndash;10 V</li>
<li>Recommended working voltage (Packer / Liner): 6&ndash;8 V</li>
<li>Length: 10.9 cm</li>
<li>Weight: 142 grams</li>
</ul>
Advanced Battery Pack
<ul>
<li>Display: Full-colour TFT with 5-button interface</li>
<li>Features: Voltage, hertz, session tracking, Jumpstart function, Snap Connector</li>
<li>Charging: Via included Critical Charging Dock or USB-C cable</li>
<li>Battery life (Shorty): Up to 6 hours runtime (depending on usage)</li>
<li>Battery life (Standard): Up to 15 hours runtime (depending on usage)</li>
</ul>

The Bishop Rotary Power Wand Advanced Shader (3.5 mm stroke) is designed for black and grey work, smooth shading, and fine line detailing. It features a brushed Faulhaber motor with custom winding and built-in give for a softer hit. Recommended working voltage: 8.5&ndash;10 V.
The Power Wand Advanced Complete Set combines Bishop&rsquo;s most compact and lightweight tattoo machine with upgraded Critical Advanced batteries. The Shorty battery now offers up to 6 hours of runtime (previously 5 hours), while the Standard battery offers up to 15 hours (previously 10 hours). Available in Shader (3.5 mm), Packer (4.2 mm), and Liner (5.0 mm) configurations, each version is tailored for specific tattooing needs&mdash;from soft shading to bold colour packing and precision linework.
This set includes both the Standard and Shorty versions of the Bishop x Critical Power Wand Advanced Battery Pack. Both attach magnetically and sit flush against the machine&rsquo;s backplate. The updated battery packs feature a full-colour TFT display with a five-button interface, providing real-time readouts of voltage, hertz, battery life, and run time. A built-in Jumpstart mode assists with starting large cartridge configurations, while the Snap Connector with a steel ball bearing and dual rubber washers ensures a secure connection.
Also included are a magnetic RCA adapter for optional wired use, a Critical Universal Battery Charging Dock, and both RCA and USB-C charging cables. The Power Wand Advanced is compatible with all universal Cheyenne-type needle cartridges and Critical Connect hardware, including the Critical Connect Foot Switch. It is also backward-compatible with previous-generation Bishop x Critical battery packs.
Each Power Wand is precision-machined from aircraft-grade aluminium and finished in matte black with a hand-polished band, colour-coded by type: grey (Shader), copper (Packer), or black (Liner). Measuring just 10.9 cm in length and weighing 142 grams, the Power Wand remains one of the smallest and lightest pen-style machines available&mdash;ideal for long sessions with reduced hand fatigue.
What&rsquo;s included in this set:
<ul>
<li>1x Bishop Power Wand</li>
<li>1x Advanced Standard Battery (up to 15 hours runtime)</li>
<li>1x Advanced Shorty Battery (up to 6 hours runtime)</li>
<li>1x Bishop Power Wand RCA Adapter</li>
<li>1x Critical Universal Battery Charging Dock</li>
<li>1x Grey RCA cable (2.15 meters)</li>
<li>1x USB-C charging cable (1.8 meters)</li>
</ul>
Key Features:
<ul>
<li>Available in Shader (3.5 mm), Packer (4.2 mm), or Liner (5.0 mm) configurations</li>
<li>Brushed (Shader) or brushless (Packer/Liner) Faulhaber motor with custom winding</li>
<li>Built-in give (Shader only) for a softer, more forgiving hit</li>
<li>Aircraft-grade aluminium construction with matte black finish</li>
<li>Magnetic backplate for secure, flush battery connection</li>
<li>Full-colour TFT display with intuitive 5-button layout</li>
<li>Real-time display of voltage, hertz, run time, and battery level</li>
<li>Jumpstart On/Off function for large cartridge startup</li>
<li>Snap Connector system with steel ball bearing and rubber washers for enhanced grip stability</li>
<li>Compatible with all Cheyenne-type universal needle cartridges</li>
<li>Critical Connect-enabled (works with Critical Connect Foot Switch)</li>
<li>Backward-compatible with previous-generation Bishop x Critical battery packs</li>
<li>Optional RCA connection for wired use</li>
<li>Made in the USA</li>
</ul>
Technical Specifications:
Power Wand Machine
<ul>
<li>Stroke length: 3.5 mm (Shader), 4.2 mm (Packer), 5.0 mm (Liner)</li>
<li>Motor: Brushed (Shader) or Brushless (Packer/Liner) Faulhaber</li>
<li>Recommended working voltage (Shader): 8.5&ndash;10 V</li>
<li>Recommended working voltage (Packer / Liner): 6&ndash;8 V</li>
<li>Length: 10.9 cm</li>
<li>Weight: 142 grams</li>
</ul>
Advanced Battery Pack
<ul>
<li>Display: Full-colour TFT with 5-button interface</li>
<li>Features: Voltage, hertz, session tracking, Jumpstart function, Snap Connector</li>
<li>Charging: Via included Critical Charging Dock or USB-C cable</li>
<li>Battery life (Shorty): Up to 6 hours runtime (depending on usage)</li>
<li>Battery life (Standard): Up to 15 hours runtime (depending on usage)</li>
</ul>

The TitanLeg Armrest by Titan Equipment enhances the tattooing experience by providing stability, ergonomic support, and effortless adjustability. Its extra-large cushioned surface maximizes client comfort while helping tattoo artists maintain a healthy posture by reducing strain on the back and arms during long sessions.
The armrest features an intuitive adjustment system with side-mounted flippers, allowing seamless height and angle modifications for optimal positioning. Designed for versatility, it includes both wheels and standard feet, enabling artists to choose between a mobile setup for flexibility or a stationary configuration for stability. Additionally, it is easy to assemble and disassemble, making it ideal for travel.
Key Features:
<ul>
<li>Extra-large cushioned surface for maximum comfort</li>
<li>Quick height and angle adjustments with intuitive flipper handles</li>
<li>Sturdy frame for optimal stability</li>
<li>Easy assembly and disassembly for convenience</li>
<li>Includes both wheels and stable feet for versatile setup options</li>
</ul>
Technical Specifications:
<ul>
<li>Adjustable height: 72&ndash;112 cm</li>
<li>Cushion dimensions: 70 cm x 40 cm</li>
<li>Weight: 12.5 kg</li>
</ul>
Cleaning Instructions:
Clean with lukewarm water and mild green soap. Avoid strong detergents or alcohol.

These steel grips from Dragonhawk are designed specifically for the Mast Fold Pro and Mast Fold 2 Pro tattoo machines, ensuring seamless integration. Crafted for optimal handling, they offer comfort and control during long tattoo sessions, minimizing hand fatigue while enhancing precision and ease of movement.
With their ergonomic design and balanced weight, the Mast steel grips reduce vibrations, resulting in improved stability and consistent needle performance. This balance enables smoother operation, allowing for intricate and detailed tattoo work without compromising control.
Constructed from high-grade, durable steel, these grips are built to withstand wear and tear. The steel is not only robust but also easy to clean, ensuring that hygiene standards for tattooing are met.
Key Features:
<ul>
<li>Specially designed for Mast Fold Pro and Mast Fold 2 Pro tattoo machines</li>
<li>Ergonomic design reduces hand fatigue and enhances comfort during extended use</li>
<li>Balanced weight for improved stability and reduced vibrations</li>
<li>Enhances control and precision for smoother, more accurate tattooing</li>
<li>Made from high-grade steel for durability and longevity</li>
<li>Easy to clean, maintaining high hygiene standards</li>
<li>Weight: 102 grams</li>
</ul>

Proton Evolution Professional Stencil Primer from the Pro Line is Proton's most advanced stencil application solution to date. Developed through extensive research, this specialized formula features bio-active, naturally derived ingredients that enhance stencil longevity and can also help provide a subtle soothing effect on the skin.
The stencil application solutions by Proton have been a trusted choice for artists worldwide. Now, Evolution takes it even further, lasting up to 20 hours or more on the skin&mdash;so precise and durable that artists can continue sessions the next day with the stencil still intact.
Its wax-like consistency spreads evenly on the skin, ensuring a crisp, clean, and detailed stencil transfer without distortion, expansion, or lifting. Manufactured in Spain under strict sanitary guidelines, this formulation combines the original Colombian recipe with high-quality ingredients to guarantee reliable performance.
The airless bottle design ensures smooth dispensing, prevents contamination, and eliminates product waste, maintaining optimal hygiene and efficiency. Manufactured in Spain under strict sanitary guidelines, Evolution combines the original Colombian recipe with high-quality ingredients to guarantee superior performance.
For optimal skin preparation and stencil removal, Proton recommends using the Proton Stencil Remover &amp; Cleansing Spray.
Key Features:
<ul>
<li>Strong, long-lasting stencil adhesion&mdash;up to 20 hours or more</li>
<li>Can provide a suble soothing effect on the skin</li>
<li>Wax-like consistency for smooth, even application</li>
<li>Airless packaging prevents contamination and product waste</li>
<li>Trusted by professional tattoo artists worldwide</li>
</ul>
Ingredients:
Aqua, Propylene Glycol, Glycerin, Carbomer, Triethanolamine, Isopropyl Alcohol, Sodium Benzoate, CI 42090, CI 45100, Methyl Diisopropyl Propionamide, Aroma, Geraniol, Coumarin.

Evolution Cleansing Soap from Proton's Pro Line is a tattoo soap formulated with a unique blend of bio-active ingredients. Made with 100% natural, vegan ingredients and produced using renewable energy, this soap can help soothe the skin and reduce irritation, ensuring a more comfortable experience for the client. With key ingredients such as Astragalus Root Extract, Aloe Vera, and Panthenol, it helps maintain optimal skin condition throughout the tattooing process.
This soap is formulated with a combination of natural extracts and plant-based ingredients to support skin care during tattooing. Astragalus Root Extract can help reduce irritation and promote recovery, while Aloe Vera and Panthenol provide deep hydration and maintain the skin’s natural protective barrier. Menthol delivers a cooling and refreshing sensation, while natural extracts of Thyme, Arnica, and Rosemary can help contribute to skin-soothing and regenerative benefits.
Instructions for Use:
Apply the soap directly to the skin during the tattoo process using a spray bottle. Gently cleanse the area, rinse, and repeat as needed to keep the skin clean, soothed, and refreshed.
Note: This soap is ready to use and should not be diluted, as dilution may reduce its effectiveness.
Key Features:
<ul>
<li>100% natural, vegan, and produced using renewable energy</li>
<li>Formulated with a unique blend of bio-active ingredients</li>
<li>Can have a calming effect on the skin for a more comfortable experience</li>
<li>Can help reduce redness, making it easier to tattoo the skin</li>
</ul>
Ingredients:
Astragalus Membranaceus Root Extract, Aloe Vera, Panthenol, Menthol, Thyme Extract, Arnica Extract, Rosemary Extract.

Evolution Cleansing Foam from Proton's Pro Line is a foaming cleanser formulated with a unique blend of bio-active ingredients. Made with 100% natural, vegan ingredients and produced using renewable energy, this gentle foaming solution can help soothe the skin and reduce irritation, ensuring a more comfortable experience for the client. With key ingredients such as Astragalus Root Extract, Aloe Vera, and Panthenol, it helps maintain optimal skin condition throughout the tattooing process.
This cleansing foam is formulated with a combination of natural extracts and plant-based ingredients to support skin care during tattooing. Astragalus Root Extract can help reduce irritation and promote recovery, while Aloe Vera and Panthenol provide deep hydration and maintain the skin’s natural protective barrier. Menthol delivers a cooling and refreshing sensation, while natural extracts of Thyme, Arnica, and Rosemary can help contribute to skin-soothing and regenerative benefits.
Instructions for Use:
Apply the cleansing foam directly to the skin during the tattoo process using the convenient foaming nozzle. Gently cleanse the area, rinse, and repeat as needed to keep the skin clean, soothed, and refreshed.
Key Features:
<ul>
<li>100% natural, vegan, and produced using renewable energy</li>
<li>Formulated with a unique blend of bio-active ingredients</li>
<li>Can have a calming effect on the skin for a more comfortable experience</li>
<li>Can help reduce redness, making it easier to tattoo the skin</li>
</ul>
Ingredients:
Astragalus Membranaceus Root Extract, Aloe Vera, Panthenol, Menthol, Thyme Extract, Arnica Extract, Rosemary Extract.

Evolution Process Butter from Proton's Pro Line is a tattoo process butter formulated with a unique blend of over seven natural ingredients. Made with 100% natural, vegan ingredients, it can provide soothing and redness-reducing benefits, ensuring a comfortable experience for the client. With key ingredients such as Astragalus Root, Cannabis Oil, and Hypericum, it helps maintain optimal skin condition throughout the tattooing process. Its hydrating and protective properties create a comfortable experience for both the tattooist and the client, ensuring a smoother and more efficient tattooing session.
This butter is formulated with a blend of natural oils and plant extracts to support skin care during tattooing. Olive Oil and Mango Seed Oil can help nourish and protect the skin, while Castor Oil and Sunflower Seed Oil provide deep hydration. Cannabis Seed Oil can offer natural calming properties, and Vitamin E can support skin recovery. Additionally, extracts from Astragalus Root, Calendula, St. John&rsquo;s Wort, and Rosemary can help contribute to skin-soothing and regenerative benefits. A touch of Menthol provides a refreshing, cooling sensation, and the exclusive light, fresh aroma ensures a pleasant experience without being overpowering.
Instructions for Use:
Apply a thin layer of Proton Evolution Process Butter as you would with regular petroleum jelly during the tattooing process to keep the skin moisturized.
Key Features:
<ul>
<li>100% natural and vegan formulation</li>
<li>Unique formulation combining more than seven natural ingredients</li>
<li>Can have a calming effect on the skin for a more comfortable experience</li>
<li>Can help reduce redness, making it easier to tattoo the skin</li>
<li>Pleasant natural fragrance that is not overpowering when applied</li>
</ul>
Ingredients:
Olea Europaea Fruit Oil, Candelilla Cera, Mangifera Indica Seed Oil, Alcohol Denat, Ricinus Communis Seed Oil, Helianthus Annuus Seed Oil, Cetyl Alcohol, Aroma, Polysorbate 20, Cannabis Sativa Seed Oil, Tocopherol Acetate, Menthol, Methyl Diisopropyl Propionamide, Astragalus Membranaceus Root Extract, Calendula Officinalis Extract, Limonene, Hypericum Perforatum Flower Extract, Rosmarinus Officinalis Leaf Extract, Linalool, BHA, Ascorbyl Palmitate, CI 42090, CI 45100, BHT.

Bacillol&reg; 30 Sensitive Foam and Sensitive Tissues provide effective surface disinfection for tattoo and PMU professionals, ensuring a hygienic workspace while protecting delicate studio furniture and equipment.
This material-friendly disinfectant is designed for quick and safe sanitization of alcohol-sensitive surfaces, such as client chairs, massage tables, artist chairs, armrests, leg rests, and workstations.
Available in two formats:
<ul>
<li>Sensitive Foam: A convenient 750 ml spray bottle for easy application.</li>
<li>Sensitive Tissues: A resealable pack of 80 ready-to-use, plastic-free wipes, made from renewable raw materials.</li>
</ul>
Instructions for Use:
<ol>
<li>Apply directly onto the surface, a clean disposable cloth, or use the disposable tissue variant.</li>
<li>Wipe the surface thoroughly, ensuring the disinfectant is evenly distributed.</li>
<li>Allow all treated surfaces to dry naturally, rinsing is not required.</li>
</ol>
Key Features:
<ul>
<li>Disinfects quickly without leaving residues</li>
<li>Aldehyde-free, fragrance-free and no strong odours or harsh chemicals</li>
<li>Gentle on materials and suitable for sensitive surfaces, including synthetic leather, Makrolon&reg;, Plexiglas&reg;, and Polysulfon</li>
<li>Foam application ensures thorough coverage and even distribution, reducing the risk of missed areas</li>
<li>Versatile for use on treatment chairs, armrests, workstations, control panels, screens, and other studio equipment</li>
</ul>
Please note: This product is approved for use in the Netherlands. For other countries, we recommend checking your local regulations.

Crystal Ink Cup Trays are designed to improve organization and efficiency in your workspace. By seamlessly integrating ink cups into a single, practical design, these trays eliminate the need for separate holders, ensuring your workspace remains tidy and optimized for productivity.
Made from durable, transparent plastic, the trays provide a stable and mess-free solution for tattoo and permanent makeup professionals, effectively minimizing spills.
Available Configurations:
<ul>
<li>Tray with 6 ink cups (10 mm)</li>
<li>Tray with 6 ink cups (13 mm)</li>
<li>Tray with 3 ink cups (13 mm)</li>
</ul>
Key Features:
<ul>
<li>Seamlessly combines tray and ink cups into one convenient design</li>
<li>Made from durable, transparent plastic for enhanced stability and clear visibility</li>
<li>Variety of options available in 10 mm (6 cups per tray) and 13 mm (3 or 6 cups per tray)</li>
<li>Designed for professionals to maintain a clean, organized, and spill-free workspace</li>
</ul>

Zen Unique Cartridges, recognized by their signature purple colour, offer the perfect balance of precision, control, and smooth performance. Designed for artists who value consistent ink flow and optimal stability, these cartridges deliver clean, accurate results with every pass.
Zen Unique Cartridges feature a centered needle design that aligns the needle perfectly within the tip. This design enhances control during tattooing, ensuring a smooth application and even ink distribution. Additionally, a built-in safety membrane prevents ink from flowing back into the tattoo machine, protecting both the equipment and the artist. A stabilizing bar further ensures needle precision by minimizing movement during use.
Zen Unique Cartridges are available in a wide range of popular sizes and configurations, making them ideal for both tattoo artists and permanent makeup specialists. Each box contains 20 cartridges, which are compatible with all tattoo machines that fit Kwadron or Cheyenne-type tattoo cartridges.
Key Features:
<ul>
<li>Smooth and consistent performance</li>
<li>Centered needle design for enhanced control</li>
<li>Built-in safety membrane to prevent ink backflow</li>
<li>Stabilizing bar ensures needle stability and precision</li>
<li>Medical-grade casing made from durable PC material</li>
<li>Sterilized using EO gas and individually packaged</li>
<li>Available in all popular configurations and needle sizes</li>
<li>Signature purple-coloured cartridges</li>
<li>Box of 20</li>
</ul>

Zen Classic Cartridges, recognized by their signature gold colour, offer the perfect balance between traditional tattoo needles and modern cartridge systems. Designed for artists who value the precision of old-school needles with the efficiency of a cartridge setup, these cartridges ensure smooth ink flow, stability, and consistent performance.
Unlike most tattoo cartridges, Zen Classic Cartridges feature needles soldered beneath the bar, positioning them lower inside the tip. This unique design enhances ink flow and consistency, replicating the smooth application of traditional tattoo needles. Additionally, a built-in safety membrane prevents ink from flowing back into the tattoo machine, protecting both the equipment and the artist. A stabilizing bar further ensures needle precision by minimizing movement during use.
Zen Classic Cartridges are available in a wide range of popular sizes and configurations, making them ideal for both tattoo artists and permanent makeup specialists. Each box contains 20 cartridges, which are compatible with all tattoo machines that fit Kwadron or Cheyenne-type tattoo cartridges.
Key Features:
<ul>
<li>Smooth and consistent performance</li>
<li>Needles soldered beneath the bar for optimal ink flow</li>
<li>Built-in safety membrane to prevent ink backflow</li>
<li>Stabilizing bar ensures needle stability and precision</li>
<li>Medical-grade casing made from durable PC material</li>
<li>Sterilized using EO gas and individually packaged</li>
<li>Available in all popular configurations and needle sizes</li>
<li>Signature gold-coloured cartridges</li>
<li>Box of 20</li>
</ul>

Available in all popular configurations and needle sizes

New Product

Open Sans

normal

Cartridges

Includes disposable razors, magic tape, tissue rolls, pre-cut tissues, armrest covers, and chair covers

The new Noir Range

Crystal

Tattoo Spray® is a protective film that seals and protects tattoos and promotes healing

Popular Categories

Most Popular Products

New Products

Special Offers

Top Brands

Popular Categories

Most Popular Products

New Products

Special Offers

Top Brands

Subscribe to our newsletter